A crimping tool is a device used to conjoin two pieces of metal by deforming one or both of them in a way that causes them to hold each other. The result of the tool’s work is called a crimp. A good example of crimping is the process of affixing a connector to the end of a cable.
Also, wHAT IS A crimp tube?
Crimp beads and crimp tubes are designed for securing the ends of jewelry stringing cable. Some also work for memory wire or stretchy cord. Crimp tubes are almost identical to crimp beads. Some crimp tubes are longer, which can give you more crimping surface for extra security.
Additionally, what is a crimp in Jewellery making? Crimps may be small in size, but they are “super findings.” Crimps are metal and mighty–holding stringing materials and beads together in jewelry designs. The term “crimping” means to join two or more pieces of metal or other material by deforming one or both to hold the other.
Also to know, what can I use instead of crimp beads?
Crimp tube findings come in a few styles:
- Crimp tubes are incorporated into your design like crimp beads.
- Crimp tubes with loops and hook ends can be used as a way to finish off your Accu-Flex® as well as work as your clasp.
- An alternative to crimp beads and crimp tubes is a newer finding called Screw-Tite Crimps™.
Which crimping tool is the best?
5 Best Crimping Tools for Wires – Reviewed 2020
- Titan Tools Ratcheting Wire Terminal Crimper – Top Pick.
- Channellock Wire Crimping Tool with Cutter – The Runner-Up.
- IRWIN VISE-GRIP Crimp Multi-Tool – Best for the Money.
- WGGE WG-015 Professional Wire Crimp Multi-Tool.
- Amzdeal Crimping Tool Kit for Wires & More.
Related Question Answers
Why is soldering better than crimping?
Crimping offers stronger, more reliable connections than soldering. Soldering uses heated metal to join the cable to the connector. Over time, this filler metal will degrade, which may cause the connection to fail. Most electricians will agree that crimping is also easier than soldering.
Can I use pliers instead of crimpers?
Pliers are not crimpers! Neither are hammers, vises, needle nose pliers or flat rocks. A good crimper when used correctly will make a cold weld between the wire and the barrel of the connector. If you were to cut a well executed crimp in half you would see a solid form of wire and connector.
How many crimping tools are there?
Common Crimper Types
- Hand Crimpers. These handheld crimpers used for smaller wires.
- Hydraulic Crimpers. Hydraulic crimpers can apply much more pressure than small handheld crimpers and are used for thicker wires.
- Hammer Crimpers.
How do you release a crimping tool?
Position the terminal or splice and wire between the crimping jaws, as described in Section 3. 3. Hold the wire in place and squeeze the handles until the CERTI-CRIMP tool ratchet releases.
How do I know my crimp size?
Crimp tubes are measured length by outside diameter (OD), i.e. 3x2mm means 3mm long by 2mm across. You will also see the inside diameter (ID) measurement noted which indicates the inside space of the crimp and how much room there is for your stringing material.
What is the difference between a crimp bead and a crimp tube?
Crimp covers are designed to fit over the crimped bead or tube. They look like a bead, so it gives the design a more finished look. You can learn more about using crimp covers with this tutorial.
Why do my crimp beads break?
Answer: It’s possible that the crimp bead has too much extra space inside. When you crimp it, there isn’t enough wire in there to make the crimp bite like it’s supposed to and the crimp breaks. Try using a larger diameter of wire with your crimp beads, or use a smaller diameter of crimp beads.
What size crimp cover should I use?
For those designs where you want to disguise crimped crimp beads, choose crimp covers in the metal and size that suits your design – 3mm crimp covers work well at covering most 1x1mm-2x3mm crimps. However, if your design has 4mm metal beads in it then you may prefer to use 4mm crimp covers.
WHAT IS A crimp cover?
How to Use Crimp Covers. You can use crimp covers to hide crimp beads when you’re making jewelry. They are designed to look just like a spacer bead and are great for adding a decorative touch to finish off your project. Find out how to use crimp covers below.
Can you use crimp beads on thread?
Can crimp beads be used with thread? The metal edges of a crimp bead can cut or fray thread when crimping so it is not recommended to use crimps when designing with thread. Instead, use knots with bead tips or French wire for a professional finish to your designs.
Do you need crimping pliers?
Regular Crimping Pliers are a must have tool for compressing 2x2mm or 2x3mm crimps. Regular Crimping Pliers allow for your design to be secure with a crimp bead that looks and feels smooth. Easy to follow instructions can be found in our Tips and Tricks section.
Can you use crimp beads on stretch magic?
Begin stringing your beads onto the elastic. Pull both ends of the Stretch Magic until the beads are right up next to the crimp bead. Use the tips of the chain nose pliers to grasp the crimp bead. Squeeze the crimp bead flat with the chain nose pliers.
What is the best beading wire?
For most basic bead stringing projects, we recommend Soft Flex or Beadalon flexible beading wire, which are made of multiple strands of stainless steel covered with nylon. Use crimp beads to securely fasten flexible beading wire to a clasp.
What are bead tips used for?
Bead tips are designed to conceal and protect knots and create a secure connection to jumprings and clasps. Bead tips terminate jewelry designs with a clean and professional finish. When finished, bead tips look like small, metal beads at each end of the strand.
How do you crimp beads with regular pliers?
To use crimp beads, thread a piece of jewelry wire through a crimp bead and a clasp, then feed the wire back through the crimp bead to form a loop. Move the crimp bead close to the end of the clasp. Next, use crimping pliers to flatten the bead in the middle to form a “c” shape and round out the shape.
How do you make a necklace without crimp beads?
Run your bead to the center of the wire. The wire will go in one hole and out of the other. Take the wire as it comes out and loop it back through that first hole again. This is going to loop the bead in place without having any scratchy crimp beads on either side.
How do you attach a lobster clasp to a wire?
Attaching Tigertail to a Lobster Clasps
- 4 Slide Crimp On. Slide a crimp into a tiger tail.
- 5 Slide Clasp on Wire. Put tiger tail through the loop on the bottom of the lobster clasp.
- 6 Loop Wire Back through Crimp.
- 7 Position the Crimp Pliers.
- 8 Crimp the Crimp!
- 9 Position the Pliers.
- 10 Squeeze Close.
ncG1vNJzZmijlZq9tbTAraqhp6Kpe6S7zGiuoZmkYra0ecBmmquhnaW2r7OMraaopF2qwKawjJ%2Bmqw%3D%3D
